Back to Certainly Blog

As the debate on biomass heats up between power firms and various environmental groups, the Stove Industry Alliance (SIA) is adding its voice to those extolling the green credentials of wood as a renewable fuel source.  The group is also keen to highlight the different environmental considerations surrounding the use of wood to heat the home, as opposed to those involved when energy companies burn biomass to produce electricity.

Phil Wood, Stove Industry Alliance (SIA) Chairman, comments: “The SIA formed in 2008 with objectives in support of government initiatives to reduce dependency on fossil fuels and to lower CO2 emissions. Up to one fifth of global energy could be provided by biomass without damaging global food production, and that’s a hugely exciting prospect for the future.

“Though many are voicing concerns over the large-scale operation these future biomass power stations will involve, we’re eager to remind homeowners that on a domestic-scale, burning wood is an incredibly environmentally-friendly option. If owners use their wood burning stove correctly, and source their wood responsibly, they can rest assured that they’re maximising the green credentials of their home.”

Whilst the harvesting, transporting and processing of wood to create fuel for biomass power stations could have a significant impact on CO2 emissions, the use of logs in residential stoves does not rely on the same carbon-intensive production chain.

In a survey conducted by the SIA, wood burning stove retailers reported that at least 36% of homeowners supply at least half of their wood themselves. With the majority of the remaining wood sourced from a local garage or wood retailer within 5 miles of an owner’s home, or delivered from a logs/solid fuel merchant within a delivery catchment area of approx. 50 miles; the carbon footprint of logs is significantly lower than the use of biomass in industry.

Biomass electricity carries an entirely different set of environmental considerations to using wood in residential wood burning stoves – the latter offering a truly environmentally friendly, sustainable means of heating the home.

Whilst it is essential that logs are thoroughly dried before burning to improve their energy efficiency, no further treatment of the wood is required.  Freshly harvested wood contains a naturally high amount of water, between 65-90% depending on the species. Experts recommend that wood is seasoned for at least a year, preferably two.

Consumers can dry their own wood in a wood store or buy dry and seasoned wood from their supplier. However, for immediate burning experts recommend buying kiln dried wood. These have an average moisture content of below 25% and consequently produce 4.5 kW/h per kg, compared to wet/freshly-cut wood and semi-dried logs, which produce 1.0 kW/h per kg and 3.0 kW/h per kg respectively. Using drier wood therefore means that fewer logs can be used to produce the same heat output; preventing the waste of money, labour, transport and storage associated with using more logs, all of which reduces the carbon footprint of the stove. One of the largest companies supplying kiln dried wood, Certainly Wood, uses wood waste to fuel the kilns; making the process sustainable and environmentally friendly.

Taking account of the whole life cycle of the fuel, modern wood burning stoves are virtually carbon neutral; with emissions of only 0.008 kg CO2 per kWh1. High-quality wood emits less CO2 when burned than it does with natural decay, and used with a correctly installed stove, approved for burning in smoke-controlled areas, it provides both economic and environmental advantages for homeowners.

New statistics from Kiwa GASTEC at CRE, the energy management and low carbon consultancy, training and product testing facility, confirm that replacing a decorative gas fire with a wood burning stove will reduce the carbon footprint of the house by 22%, a figure that rises to 36% when replacing an LPG decorative gas fire with a wood burning stove.  The reduction in carbon, when replacing an open fire is 14%.

In contrast to estimates from the Department of Energy and Climate Change (DECC) which state that approximately 80% of wood fuel will have to come from imports to meet government forecasted targets for biomass-generated electricity, estimates for wood supply in the residential sector exceed even the most optimistic forecasts for demand. In other words, the demand for the wood required by residential wood burning can be met from sustainable sources for the foreseeable future.

Phil adds: “With an estimated 180,000 wood burning stoves fitted in UK homes in the last year alone, the considerable environmental advantages associated with this eco-friendly fuel really seem to be striking a chord with homeowners. More and more we’re hearing consumers citing their desire to reduce their carbon emission as a key factor in their decision to install a stove, and we look forward to a greener future as the nation switches on to this environmental friendly means of heating our homes.”

The Stove Industry Alliance (SIA) was formed in 2008 to promote the benefits of wood burning stoves. With more than 35 member organisations, including manufacturers and distributors of stove equipment, the SIA’s objectives are in support of government initiatives to reduce dependency on fossil fuels and to lower carbon dioxide emissions. For more information about the benefits of a wood burning stove, visit or call 01789 415640.



Media Enquiries

For more information, please contact Anna Shackleton, Lindsey Reaney or Phillippa Holmes at Golley Slater PR / 0121 384 9743, / 0121 384 9719, / 0121 384 9711

Notes to Editors

1 DECC SAP 2009 edition (incorporating RdSAP 2009) Table 12.

-    The Stove Industry Alliance (SIA) is an alliance of manufacturers, distributors, advisory/test house bodies and other interested parties who sell stoves, both space heaters and boiler stoves, and also flue and chimney products and fuel.
-    The SIA works closely with HETAS which is a government recognised body for the testing and approval of biomass and solid fuel residential heating appliances, fuels and services, including the registration of competent stove installers and servicing businesses.
-    The cost comparisons we have made are based on government approved figures published in SAP 2009.

Top tips

•    Installing a stove is not a DIY job.  It should only be undertaken by a competent person.  Most stove retailers will work with properly trained installers
•    Recommend the use of a HETAS registered installer
•    The chimney should also be checked to ensure that it has no cracks or leaks.  A competent installer will do this as part of the installation procedure.  The chimney may need to be relined.
•    It is important to ‘size’ the heat output to match the size of the room.
•    It is also important that the correct amount of combustion air is supplied to the appliance.
•    Decide if you want the stove to heat a room or be linked to the central heating system.
•    If your house is in a smoke control area, a DEFRA exempt stove must be used.  A DEFRA exempt stove has been deemed suitable to burn wood in a smoke control area.  Most urban areas are smoke control areas.
•    Ensure that the wood is properly seasoned (ideally less than 20% moisture content).
•    Check the standards to which the stove has been manufactured:
o    CE mark
o    HETAS approved

What is wood biomass and how does it differ from fossil fuel?

The vital difference is one of timescale.


Leave a comment

Please note, comments must be approved before they are published